Samsung Smart TV Remote Not Working

Samsung Smart TV Remote Not Working

The Samsung Smart TV remote is a sleek and stylish device that allows you to control your television with just the tap of an easy-to-use button. However, some users have been reporting issues such as not being able to connect properly or losing signal entirely from their controller. Here are some tips for troubleshooting steps so try them all before giving up on this fantastic piece altogether. Keep reading to know why Samsung Smart TV Remote Not Working

Replace the Samsung TV Remote’s Battery:

One of the first things you should try if your Samsung smart TV remote isn’t working properly is checking whether or not its battery needs replacing. The unit powers on with two standard AAA batteries which slot into place in the back of your remote. The remote’s battery does have a good amount of life, but you’ll have to replace those batteries every couple of months.

When your remote stops working, chances are that it’s because of a dead battery. To find the cover for this on a Samsung TV Remote you will need to turn over and look at the back where there can see some a dimple engraved, The battery cover of your Samsung TV’s main unit is usually found near an arrow printed onto its backside which will indicate how to remove it for replacement.

To remove the batteries, simply press and apply pressure with your thumb on this arrow. Push down until it clicks off to reveal the battery compartment.

The next step is to remove the old batteries from your remote and put in new ones. Make sure you use a AAA type of battery because they’re usually what’s needed for most TVs, but check that the marking on the inside compartment matches up with which kind works best for yours.

Discharge your Remote:

Glitches in the electronic circuits of your remote control may be causing this problem. If you’re unable to fix it with new batteries, try resetting your remote, it might help.

To fix your remote, you’ll need to discharge it first. The best way is by holding down every button on the device and pressing slowly for 20 seconds, this should do the job while the batteries are removed.

Then, slip both batteries back into the remote and make sure it’s connected. This will clear any software or hardware glitch that may have occurred during the use of your TV Remote Control.

Check if the TV’s Infrared Sensor is obstructed:

The remote control may not work because your TV’s infrared sensor is blocked. The sensors in remotes emit a beam of light that can be seen by the device and received as input if there are no obstacles between them. This sensor is situated on the bottom of your TV. For some, it will be in central right below Samsung’s logo while other TVs have this area placed at an angle to them with its own unique identifying pattern so you can find yours easily.

You don’t want the TV to get in a position where it can no longer detect your remote, so make sure there are absolutely no obstructions between them.

Keep your remote pointing towards the sensor when you use it and be sure that there is nothing blocking its line of sight with any furniture or decorations around.

Why is the Red Light on my Samsung TV Remote Blinking?

The flashing red LED on the Samsung Smart TV Remote shows that there’s either a problem with your batteries or something else wrong. You should check to make sure this is connected properly and or replace batteries if necessary, before trying again.

In order to get your remote working again, you need to plug your TV into the outlet and test or replace both AAA batteries on your remote. then try again.

Turn on the TV and find your remote. If it’s not working, make sure you have a strong signal by checking that there are no walls or other obstacles between them. come near your TV to find out the remote receiver module on it. When you press a key on the remote, this is where it will light up red. To turn the button back off and stop seeing that message of warning, tap the underneath button to activate it.

You can also trigger remote pairing mode by pressing and holding down both the back button for ten to twenty seconds as well as play/pause. by this way you can wake it up.

Note:  To ensure that your TV and remote are paired together, make sure there’s only one SamsungGalaxyTVRemote in the room.

Check if the Remote’s Infrared Emitter is Faulty

Your remote may not be working because of an issue with its infrared emitter. This is how you can check if this problem persists on your end. guiding a digital camera or smartphone to the infrared  LED near the top left corner will allow for testing, then press a button on the remote.

The light from your TV Remote should be flashing through the camera or phone screen. If it isn’t, there may be a problem with your remote, in which case you might need to purchase another remote control for this device.

Can I use my smartphone as a Samsung TV Remote?

Instead of waiting for the remote control that never seems to show up, you can use your smartphone as a substitute. Here are some easy steps on how to get started with using it in place of an actual TV-range Official Samsung Remote Control as an option.

Step 1: Download and Install SmartThings

To get started with SmartThings, download the free app on your mobile device of choice. From here you can manage and monitor all sorts of smart home devices from Samsung and your TV is not the exception.

The SmartThings app is available on both iOS and Android, giving you the ability to control your TV with a non-Samsung device. You can also use an iPhone or iPad if desired. First, make sure that both phones and TV are connected via WiFI then open up the “Smartthings” app.

Step 2: Open the SmartThings App.

To get started, we’ll need to open the SmartThings app on your phone and connect it with a TV. If you see an alert about this new device appears when opening for the first time saying “A New Device Has Been Found.” Your screen should display either a TV icon.

If the SmartThings app doesn’t detect your TV, don’t worry. To add it manually go into Settings and select TV from there before downloading an Add-on for support of specific models, just approve installation when prompted by clicking Agree on screen.

If connecting your TV to the SmartThings app doesn’t work, go ahead and press “Add Device” from within Settings on your devices. then tap “TV” from the device categories and follow the guide on the screen to connect your phone to the TV via the SmartThings app. Read more: Home & Garden 

 Step 3: Select the TV from the Dashboard.

You can use your new virtual remote to control the TV from anywhere in any room. This is done by selecting it on a specially designed page within SmartThings app where you will be able to change channels, and volumes and even select an input source for whatever device that needs watching.

The app allows you to play content such as Netflix and Prime Video on your Samsung Smart TV. You can also add buttons for quick access, just like what’s included with newer versions of the physical remotes.

Mirror your phone’s screen using SmartThings. You can also use the app to connect and cast whatever you’re doing on your mobile device, whether it be watching Netflix or playing games like PUBG Mobile. This is possible using SmartThings, but only on Samsung mobile devices. If you’re running another Android or iOS device respectively you’ll be able to use Google’s Cast feature and AirPlay instead.

This is perfect for showing off your favorite photos and videos to anyone in the room. You can even stream live TV directly from websites using services like Tizen.

When connecting your phone or tablet to the smart TV, make sure you select “Smart View” in order for screen mirroring.


Some of the most common troubleshooting steps to fix issues with your Samsung TV remote are listed above. If those don’t work, it’s possible that either you have a faulty device or one may need repairing and replacing.

In order to fix your Samsung Smart TV, you will need a new remote or smartphone as an alternative. If this does not work then it is likely that there’s something wrong with the hardware on your TV and should be taken into account by contacting customer support to get help.

FAQ – Samsung Smart TV Remote Not Working:

Why is my smart TV not responding to the remote?

There are a few potential reasons why your smart TV might not be responding to the remote.

One possibility is that the batteries in the remote are dead. Make sure to check the batteries and replace them if necessary.

Another possibility is that the remote itself is broken. If this is the case, you’ll need to purchase a new remote in order to control your smart TV.

Finally, it’s also possible that there’s something wrong with your smart TV and it’s not receiving any input from the remote. In this case, you’ll need to troubleshoot the issue with your TV manufacturer or service provider.

How do I use my Samsung Smart TV without the remote?

you can use the smartphone with pre installed app as an alternative or the buttons on your TV.

What do you do when your remote doesn’t work anymore?

If your remote doesn’t work, the first thing you should do is replace the batteries. If that doesn’t work, try unplugging the TV and plugging it back in. If that still doesn’t work, you may need to get a new remote.

How do I get my Samsung Smart TV remote to work?

There are a few things you can try if your Samsung Smart TV remote isn’t working properly. First, make sure that the batteries in the remote are fresh and inserted correctly. If that doesn’t work, you can try resetting the remote. If the remote still isn’t working, you may need to contact Samsung customer support for further assistance.

One comment

Leave a Reply